Schlage AD 400 Series locks seamlessly integrate with the Genetec Synergis Access Control System to provide a cost effective and scalable access control solution to meet your security needs. With the Synergis system, you can deploy IP-based access control with Schlage electronic locks to conveniently extend the reach of your security system to hard to reach areas without compromising security.

With the Synergis Access Control System, operators are able to:

• Manage and monitor all of their security infrastructure from a single platform
• Run consolidated reports across all their entire access control deployment, including electronic locks
• Achieve greater situational awareness by viewing all Schlage lock events and alarms linked with live and recorded video when unified with Security Center

The AD 400 Series is available in both hardwired and wireless configurations to suit the requirements of the facility.

Extend the reach of Access Control

The Schlage AD Series wireless system allows users to extend the reach of access control to areas where running wires is difficult, expensive or virtually impossible. Installations on interior doors, remote doors, historic buildings, 24/7 facilities, elevators and parking gates are now made possible by eliminating the need to run wires directly to the access point.

Features and benefits

Security:

• Electronics bring more visibility and control to the opening
• Modular design allows reader upgrade to fit changing credential needs without changing the lock
• Secure encrypted data transmission

Convenience:

• Works with same credential used on the building perimeter
• Integrated design combines electrified lock, credential reader, request-to-exit and request-to-enter sensors, door position switch and tamper switch
• Smart credentials can be used for vending and other applications
• Non-invasive installation

AD-400 via RS-485 with Synergis System and Mercury EP2500 controllers

 

• Mercury EP2500 controller supports up to 64 locks.
• Mercury EP2500 controller supports a maximum of 8 PIM400-485 per RS-485 port. There are 2 RS-485 ports on each Mercury EP2500 controller.
• Although not specifically shown, the Mercury EP2500 controller can simultaneously support both AD-300s and AD-400s on a common port. You are limited to 8 PIM400-485 and AD-300 combined per RS-485 port and a maximum of 64 AD locks per Mercury EP2500 controller.
• Wireless range up to 200' in typical building construction, up to 1000' line of sight.

Version and ordering information

Compatibility

SC 5.5 or greater

Genetec part number

• Genetec Part Number per client (Ex. One GSC-1SDK-PARTNER-PRODUCT per client workstation)
• Partner part number as needed (ex. Per Client/Server)